Kannrybio | Implant-grade Bioactive Ceramics & Calcium Phosphate Powders
IMPLANT-GRADE · BIOCERAMICS

Bioactive materials engineered for bone regeneration

Kannrybio provides implant-grade calcium phosphate and bioactive glass powders for orthopaedic, dental and regenerative medicine partners worldwide.

  • α/β-TCP, HA, 45S5, CPC systems and scaffolds
  • ISO 13485 production and batch documentation
  • Custom PSD, BET and doped CaP formulations
View product portfolio See COA samples
Bioactive porous sphere
Hydroxyapatite microspheres
Tricalcium phosphate powder
PRODUCT CENTER

Implant-grade portfolio

Six focused product families covering calcium phosphate, bioactive glass, silicates, CPC systems, calcium sulfate and polymer composites.

CaP

Calcium phosphate series

α/β-TCP, micro & nano HA, HA whiskers and OCP for bone grafts, cements and coatings.

For orthopaedic & dental graft concepts
View CaP products →
BG

45S5 Bioactive Glass Series

45S5 bioactive glass powders (micro / nano) and microspheres, specified by composition (45/24.5/24.5/6 wt% SiO₂/CaO/Na₂O/P₂O₅) for controlled ion release and surface reactivity.

For bone void fillers & composite systems
View bioactive glass →
CPC

Calcium Silicate Series

Calcium silicate powders based on tricalcium silicate (C3S) and dicalcium silicate (C2S), available in nano/micro grades for cement systems, alkalinity modulation and mineralization-related studies.

For bioactive cement research, composite development and setting-behavior studies.
View Calcium Silicate Series →
CaS

Calcium sulfate series

Hemihydrate and dihydrate calcium sulfate powders tuned for resorbable cements, beads and bone void filler systems.

For resorbable fillers and carrier systems
View CPC & scaffolds →
PL

Polymers & composites

PLLA microspheres and composite systems for controlled release, injectable fillers and advanced combination products.

For combination and next-generation devices
View CaSO₄ series →
CA

Advanced ceramic components

Ceramic heads and components built on HA/TCP and advanced ceramics for joint and motion-preserving concepts.

For combination and next-generation devices
View polymer systems →

Technical service for OEM projects

From screening powders for early prototypes to documentation packages used in regulatory submissions, Kannrybio works alongside OEM teams to stabilize both formulation and paperwork.

PSD & BET matching Phase stability & XRD COA & change control Custom blends
Formulation & scale-up support

Help choose CaP / 45S5 / CPC combinations that match indication, injectable window and mechanical needs, with a realistic path from lab batches to production.

Documentation & regulatory packets

Batch COAs, typical values, change-control notes and supplier statements aligned with ISO 13485 expectations to support your device registration.

NEWS CENTER

News & insights

Short updates on product launches, case studies and collaborations in orthopaedic, dental and regenerative medicine projects.

01 · 2026
Strengthening our implant-grade QA system under ISO 13485

Over the past quarter we’ve been tightening the “boring parts” that actually make OEM programs work: lot traceability, in‑process controls, and a cleaner COA workflow. This update summarizes what changed, why it matters, and how to request the right document package…

Read more →
01 · 2026
45S5 microspheres: consistency improvements for flow and packing

Microspheres can look “the same” in a brochure but behave very differently on a production line. We recently refined our classification and handling steps to improve flowability and packing behavior for 45S5 microspheres used in fillers and composite systems…

Read more →
12 · 2025
CPC powder-kit: scalable supply for OEM bone cement programs

For OEM bone cement programs, supply stability and documentation often decide timelines more than chemistry does. Our CPC powder‑kit offering is designed around predictable supply, defined packaging options, and clear documentation scope for evaluation vs production…

Read more →
Kannrybio laboratory and production

About Kannrybio

Kannrybio focuses on implant-grade bioactive ceramics and calcium phosphate materials manufactured under ISO 13485. Our powders and components are designed for class II–III orthopaedic, dental and regenerative medicine devices.

With a compact but focused portfolio and responsive documentation, we aim to be a stable upstream partner for OEMs and research teams building the next generation of bone grafts, cements and composite systems.

Under the Kannrybio brand we combine process control, analytical support and flexible packaging to match projects from early prototypes to commercial production.

DOWNLOAD & CONTACT

COA & documents · Talk to us

Download catalog and sample COAs, then share your indication and targets so we can suggest suitable CaP / 45S5 / CPC combinations and documentation options.

Download center

Link these buttons to your catalog, sample COA library and quality / ISO statements.

Catalog (PDF)
(Placeholder) Replace with actual links once your PDF and COA pages are online.
Document Description Download
Product catalog Overview of CaP, 45S5, CPC and scaffold portfolio. Download PDF
Sample COA pack Sample COAs for α-TCP, HA, 45S5 and CPC systems. Download ZIP
Quality / ISO statement Summary of ISO 13485 scope and quality commitments. Download PDF

Send us your project brief

Briefly describe your indication, target device class and required powder systems. We usually respond within 1–2 working days.

This field is required.
This field is required.
This field is required.

By submitting this form you agree to be contacted by Kannrybio. Typical reply: Mon–Fri, 08:00–18:00 (Beijing time).